iHeartEpoxy.com
Sparkle and Shine Tumblers Coating Epoxy - 1 Gallon Kit - IHeartEpoxy
Couldn't load pickup availability
IHeartEpoxy Sparkle and Shine Tumblers Coating Epoxy
was formulated to meet the unique needs of crafters and artists needs. It's simple 1:1 ratio is easy to work with, delivers an ultra-premium glass-like finish, is scratch-resistant, and UV stable so it won't yellow. It's affordable, for use at home as well as for commercial use. Sparkle and Shine Tumblers Coating Epoxy | Food-Safe, Non-Yellowing Resin.
Sparkle and Shine Art/Tumblers Epoxy Coating
Food Safe & Odor-Free: We formulated Tumblers Coating Epoxy with 100% food-safe, FDA-compliant ingredients and made sure that it is odor-free with no VOCs. Glass-Like Finish: I hearts Tumble epoxy's hard, scratch-resistant, clear glass-like finish. Mixes so smoothly that bubbles disappears.
.
This epoxy resin cures FAST so your projects will look great! It is UV Stable so it will not Yellow. It will stay crystal clear!
Product Details and Specifications
-
Product Details
Sparkle and Shine Tumblers Coating Epoxy Resin is a clear polymer used for coating wood, veneer, metal, stone, painted surfaces, tabletops, bar tops, many other surfaces to give a rich super gloss look and protect from scratching and air humidity.
.
You will achieve a glass like finish with a scratch resistant clear barrier to protect your project.
.
The typical pot life of Tumblers Coating Epoxy Resin is approximately 40-50 minutes based on mass and temperature. The full cure is 24 hours at normal conditions.
.
You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.
-
Technical Specifications
Sparkle and Shine Art-Tumblers Epoxy Coating is a two part kit (A/B) Resin(A) and Hardener(B).
Easy 1:1 Mixing Ratio by volume
Working Time: 45-50 minutes (100gram mass)
Fast Cure
FDA-compliant
UV Stable
No VOCs
Tensile Strength psi: 10,500
You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.
Calculate How Much Epoxy Resin is Needed with our Calculator
Epoxy Resin Calculator
Mixing Instructions
Mix this resin 1:1 by volume. If mixing by weight, mix 100 parts of resin into 83 parts of hardener. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of the mixing container.
Improperly mixed epoxy can create a major headache. Remember that thermoset plastics are temperature sensitive. Cold weather slows the curing process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature. For best results, try pouring epoxy into the hardener. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes. Use a round motion until the chemical is clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items.
This chemical needs to be stored in a dry, safe, temperature-controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use.
When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.