Marine Shine Industrial Grade Epoxy Resin - 1.5 Gallon Kit - IHeartEpoxy
IheartEpoxy Marine Shine Industrial Grade Epoxy Resin
is UV Protected Clear Epoxy Resin for Boat and Marine resin can withstand chemicals, acids, corrosion, rust, wind, salts, and of course, water. Now with UV Additive (HALS).
Due to our engineered mixture, I HEART MARINE SHINE EPOXY UV cures much more rigid, and tougher than most epoxies on the market. Easy to use with a convenient 2:1 mix ratio.
Wanted to update my review.
After I heart epoxy reached out via text, they were having email issues.
They explained in detail what was going on with my order and the order arrived within a few days.
Turns out the pigment ships separately from a different location.
Order fully received and the epoxy is very nice to work with, easy to mix and apply. easy clean up.
Will be ordering from I heart epoxy again.
Missing pigment from order no response from multiple emails inquiring about missing part of order.
MARINE SHINE INDUSTRIAL GRADE EPOXY RESIN
UV Protected Clear Epoxy Resin for Boat and Marine resin can withstand chemicals, acids, corrosion, rust, wind, salts, and of course, water. Now with UV Additive (HALS).
What are HALS? Hindered amine light stabilizers (HALS) are chemical compounds that are added to assist with reflecting UV light. HALS do not absorb UV radiation. This slows the degradation of the epoxy resin, ultimately reducing yellowing. Due to our engineered mixture, I HEART MARINE SHINE EPOXY UV cures much more rigid, and tougher than most epoxies on the market. Easy to use with a convenient 2:1 mix ratio.
WHETHER YOU ARE WATERPROOFING, MAKING REPAIRS, OR CRAFTING A PROJECT FROM SCRATCH.
I HEART MARINE SHINE marine resin, chemical and moisture resistant with proven polyamide-based toughness, is the best boat resin for your Boat Watercraft, Tank linings, Industrial and civil engineering, Concrete coating, Weatherproofing, and more.
This easy-to-use marine epoxy resin will not blush, yellow, or chalk over time, is easy to use with a 2:1 mix ratio, low viscosity, extra-long pot life of 60 minutes, 0% VOCs, and almost no odor.
You will receive part A epoxy and part B curing agent (measured by weight), full instructions, and outstanding customer support with every purchase.
watercraft building and repairs
industrial and civil engineering
Paddleboard coatings and repairs
Outdoor HIgh-Performance Boat use
No blushing and no chalking over time
ease of use mix ratio (2:1) by weight or volume.
chemical and moisture resistant
low viscosity (800cps.)
extra long pot-life of 60 minutes.
fast cure times of 24 hours.
polyamide-based system with proven industry toughness
0%VOC's and almost no smell.
HALS (Hindered amine light stabilizers) Reflect UV LIght
Tensile Strength, psi before cracking - 7500.
Calculate How Much Epoxy Resin is Needed with our Calculator
Epoxy Resin Calculator
Marine Shine is mixed at a 2:1 ratio by volume or weight. It is recommended to mix a minimum of at least 50 grams (2-3 oz.). This weight mixture will help in avoiding curing problems. Small batches below 50 grams (2-3 oz.) may experience improper curing.
When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of the mixing container.
Improperly mixed epoxy can create a major headache. Remember that thermoset plastics are temperature sensitive. Cold weather slows the curing process down, whereas heat speeds curing up. Always try to mix chemicals at room temperature. For best results, try pouring epoxy into the hardener. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes. Use a round motion until the chemical is clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items.
This chemical needs to be stored in a dry, safe, temperature-controlled environment. Always keep the lids tightly sealed when not in use. Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use.
When applying this product, use gloves, goggles, and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.